• Welcome to Andy's Workshop Forums. Please login or sign up.
 
March 29, 2024, 05:54:33 am

News:

SMF - Just Installed!


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - xzchina

1
Hardware projects / Re: HP Z440 12 pin Memory connector
February 26, 2020, 11:51:07 pm
Quote from: hen6e on February 13, 2018, 07:04:53 pmAs I have learnt, the p1 connector pinout should be as shown,but I need your confirm.
The 10、1 Pin is output for 5V equipment like sata from VRMs on the motherboard.
The 16 pin is a POWER_GOOD signal,which trun to HIGH when the PSU finish startting period.
The 17 pin is a 5v stand_by voltage which is different from z420's 11V.
The 18 pin is a negative 12V input for RS232.
The 8 pin is PS_on,connect this pin to groung will trun on the PSU.
The 9 pin PSU_ID tells the motherboard which psu is installed ,it is different from standard ATX psu.
If you have oscilloscope or logic analyzer, please capture the waveform of PSU_ID.
Thank you!


I come from China
24pin -> 18pin
Is this correct?