• Welcome to Andy's Workshop Forums. Please login or sign up.
 
April 04, 2020, 12:59:36 am

News:

SMF - Just Installed!


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - colincoates

1
Quote from: colincoates on June 29, 2015, 07:44:36 am
Hi Guys,
I was hoping you could help me out?
I've got this PSU hooked up the the z800 motherboard "http://www.scan.co.uk/products/850w-nzxt-hale82-hybrid-modular-80-plus-bronze-1x120mm-atx-psu";
I've had my multimeter out and tested all the connections at the MB side and they are all correct.
I've hooked up a pc speaker to hear the diagnostic beeps and it is complaining about power (system beeps 4 times (once per second), then a 2-second pause)
Do you think this PSU is powerful enough (70A on a single 12V Rail)

I've only got a single x5580 in at the moment to test.
It's a revision 002 board.
Any help would be greatly appreciated.


Hi Guys,
turns out it was the psu. I RMAed it for a evga 1.3kw supernova g2. It starts up and recognises both processors.
2
Hi Guys,
I was hoping you could help me out?
I've got this PSU hooked up the the z800 motherboard "http://www.scan.co.uk/products/850w-nzxt-hale82-hybrid-modular-80-plus-bronze-1x120mm-atx-psu";
I've had my multimeter out and tested all the connections at the MB side and they are all correct.
I've hooked up a pc speaker to hear the diagnostic beeps and it is complaining about power (system beeps 4 times (once per second), then a 2-second pause)
Do you think this PSU is powerful enough (70A on a single 12V Rail)

I've only got a single x5580 in at the moment to test.
It's a revision 002 board.
Any help would be greatly appreciated.