• Welcome to Andy's Workshop Forums. Please login or sign up.
April 04, 2020, 12:43:29 am


SMF - Just Installed!

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Paul1966

Hardware projects / Re: Z800 Compatible RAM
July 25, 2017, 02:23:29 pm
Hi msilveira,
Booted 1st time after pulling a CPU.....
in retrospect I guess low voltage means higher current ??
maybe trying to step from 12gb to 96gb is too much power drain ?

Thanks again
to all who have posted
Hardware projects / Re: Z800 Compatible RAM
July 25, 2017, 03:51:35 am
Thanks for the prompt reply,

Will give this a go, and see whether it fixes the problem.

Thanks for the advice,
Hardware projects / Re: Z800 Compatible RAM
July 24, 2017, 02:43:54 pm
Hi Andy,
Thanks for your prompt reply,
I have 2 processors, therefore the sticks have to be in the configuration set out (black slots).
I don't know any other configurations I could try,
The 24gb I had originally, came out of the same black slots, meaning the slots aren't at fault?

I know some operating systems aren't as fussy as Windows, which is why we tried Ubuntu.
I also believe it's something to do with Windows, but nobody else seems to have the same fault that I do. Which is the spinning dots crashing on Windows 10 load.

I also have all the drivers up to date, and BIOS flashed to the latest version (ver3.60)

Thanks in advance,
Hardware projects / Re: Z800 Compatible RAM
July 22, 2017, 09:17:57 am
Hi All
1st Post !! :-)
I have 6 X Samsung 4rx4 PC3L-8500R-07-11-AB1-D3  (Planet First)
which POSTs passes memtest86
runs ubuntu
but fails to boot win 10 64bit (pro)(clean install)
does anyone have any ideas
as I'm so stuck.....

Thanks in advance