Andy's Workshop Forums

General Category => General discussion => Topic started by: Ultimate GaMerZ on July 06, 2019, 02:03:56 am

Title: Help me in HP z800 workstation
Post by: Ultimate GaMerZ on July 06, 2019, 02:03:56 am
Friends I am using ho z800 PC my default PSU damage I bought new PSU Thermaltake 1000w through power and I buy main power cable 18 pin connector in Ali Express and I attached PSU and start the pc but showing 4 time beep and not start pc but I removed my hdd PC working perfect.i don't know what happened this issue plz help me.i attached hdd in PC always showing 4 time beep.and removed hdd working perfectly.plz solve this my issue thanks
(https://i.ibb.co/MkRHMGQ/ae-1562397518145.jpg)

(https://i.ibb.co/nmCGHNG/1562400598976877600912.jpg)
(https://i.ibb.co/rb4jRtj/156240072812839934870.jpg)
(https://i.ibb.co/z8yPyvb/15624007673761762334608.jpg)
(https://i.ibb.co/MBTyCv5/1562400799010907494025.jpg)
Title: Re: Help me in HP z800 workstation
Post by: Andy Brown on July 06, 2019, 04:18:54 am
Hi, HP's "beep decoder" document is here:

https://support.hp.com/gb-en/document/c03599666

Four beeps = a problem with the power. Unfortunately they don't offer further debugging steps. Thermaltake are well known, quality brand so I expect your new PSU is fine.

When your old PSU died do you think that there is a possibility it fried something on the board at the same time?
Title: Re: Help me in HP z800 workstation
Post by: Ultimate GaMerZ on July 06, 2019, 08:46:59 am
Thanks for reply Sir .I read manual and check all thing in board and fixes all issue removs all devices but not fix issue without hdd working perfectly.but I connect power wire in hdd or and DVD no sata wire only power wire .and problem show me .I uploaded my PC issue video here plz check Andy Sir.i update already new bios this Version: 3.61 Rev.A  Release date:Mar 6, 2018.my board Rev: 003
https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-z800-workstation/3718645/swItemId/wk-207280-1 (https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-z800-workstation/3718645/swItemId/wk-207280-1)

https://vimeo.com/346544447 (https://vimeo.com/346544447)

(https://i.ibb.co/pZvKVWt/IMG-20190706-205616.jpg)
(https://i.ibb.co/4KRJrWZ/IMG-20190706-212632.jpg)
Title: Re: Help me in HP z800 workstation
Post by: lukew on December 14, 2019, 07:10:00 am
Compare the pinouts of the adaptor leads with the HP documents and ATX standard. I bought them leads and the PS_OK and 5Vsb pins were reversed. You should also disconnect the 5V between the motherboard and the power supply, that should not be connected. The motherboard generates it's own 5V and what the lead is doing is connecting that to the power supplies 5V output.