Hello to all modders, I'm happy to be here on the great board
and greetings from Germany at munich bayern
I would like to introduce my insperation through the board here
The project wedding LianLi PC7 and HP-Z600
I bought the LianLi myself in 2001-2002 and since then it has seen a lot, the last years it was only in the corner but now it gets breathed new life
For fixing a part of the mainboard screws fit original from the case only 5 new holders had to be made because I cut the original HP spacer cut the pin and cut a hole and cut 3mm / 1/8 inch thread
Unfortunately, I can not continue because I do not get two CPUs to run, I bought the board and he had only one CPU installed!
Board is a 003 so also 6 cores suitable but I get only one whether 4 or 6 cores to run
the error looks like this from the HP-Z600 goes on and I see only the top left corner in the corner of the console flash or the Blue HP logo and so it stops! do I pee the CPU1 he goes without problems who would have a tip
Bios is 3.61 on it
Images:(https://picload.org/image/dowpplcw/img_2804.jpg)
(https://picload.org/image/dowpplci/img_2801.jpg)
(https://picload.org/image/dowpplcl/img_2800.jpg)
(https://picload.org/image/dowpplca/img_2799.jpg)
The last picture shows where the Z600 stops is a second CPU installed
[/color]
(https://picload.org/image/dowpplpw/img_2823.jpg)