• Welcome to Andy's Workshop Forums. Please login or sign up.
 
December 14, 2019, 09:51:06 pm

News:

SMF - Just Installed!


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - telanoc

1
Yes, I have one plane for VCC and one for ground (besides top and bottom).

Here's a pic of board #3, still needing a bit of flux cleanup.  I've been running the xmem::selftest() in a loop for 15 minutes or so.

By the way, a big "Thanks" for designing this thing in the first place.
2
Hi, y'all.  I wound up making my own "clone" of Andy's Mega 2560 SRAM expansion, which uses a full-width connector across the end of the board, picking up power and ground.  I also moved the jumpers for the LEDs a bit.  And let Eagle do most of the routing.

I wound up doing 4 layers mainly because I could.  The board is on Osh Park at https://www.oshpark.com/shared_projects/5dhn3IBO

Board and schematic are on github: https://github.com/telanoc/mega2560_xmem

I've got one put together (jeez, I didn't realize how small those chips were) and it's working with no issues.