Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - John Erik Krische

Pages: 1
1
well i got the board inside of my nanoxia deep silence 6. I had a few problems, none really stopped me though my first problem was drilling the holes. the first one went fine, but the second one was slanted because my drill is too fat. i aso accidentally drilled into the board. but it only drilled into the pad around the screwhole, so i should be fine. i decided i shouldent try drilling anymore holes so i used a standoff and a ziptie to secure the top of the board.next i had the same problem as mentioned inn the original article. my pcie cards needed to be bent to fit. but aside frm that i am fine. I am typing this on my "Mostly" completed system now in fact. it is runnning lubuntu, as i didnt know windows home didnt support dual processors.
currently i have a rev 3 motherboard, nanoxia deep sinlence 6, gtx 970, 600 watt thermaltake(will be upgraded to a 1000 watt corsair), dual e5530(will be upgraded to x5680s), two cooler master t4, wireless card, combo usb 3 and sata 6 card(running a 120gb 850 evo and a wd blue 1tb).

2
Ive also gotten my system booted with just a 600 watt psu. it even works with the 970. though i am currently using e5530s which are Pretty low power. can you also possibly give me a template for the drill holes, as i am getting the ds6 as well. also the adapters are avalable on ebay now. http://www.ebay.com/itm/381204131893?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

3
Hello... I'm a french designer, 2 month ago I've discover the Andy Workshop forum and especially this thread.  :)

I was immediately interested because I was looking for a high performance workstation (computing CPU / GPU for 3D rendering) but with a "small" budget.
I invested in an HP Z800 #02 which the seller indicated what works for XEON X56xx.

So I bought :

2x X5670 + Fans
3x GTX 780 Ti
48GB of RAM
Enermax 1500W PSU with an adapter for Z800:
http://www.ebay.fr/itm/171828272385?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I tested with different configurations but nothing happens, the mainboard seems unwilling to start. I have no display, no sound, nothing. Only fans run ... What to do?
Does that could come from the BIOS is not actually flashed to date? Or too much watt from the PSU?

Thank you to help me!! I'm confused and I need to work quickly...
Talk soon

Nicolas
The 002 boards only work with a single x56xx processor, even if they are flashed to the latest image. you will need a 003 revision board. just wait on ebay. you should find one sooner or later

4
Here's how I mounted my hyper t4 screw the lga 1155 or whatever else standoff in upside down.
Just a little warning. Make sure to screw the posts into the backplate all the way. I actually ruined one of the posts by not tightening it fully. Other then that, it has been sturdy

Pages: 1