Author Topic: Hacking an HP Z600 motherboard into a LianLi PC7  (Read 241 times)

olum64

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
Hacking an HP Z600 motherboard into a LianLi PC7
« on: June 26, 2018, 09:34:25 am »
Hello to all modders, I'm happy to be here on the great board

and greetings from Germany at munich bayern

I would like to introduce my insperation through the board here

The project wedding LianLi PC7 and HP-Z600

I bought the LianLi myself in 2001-2002 and since then it has seen a lot, the last years it was only in the corner but now it gets breathed new life

For fixing a part of the mainboard screws fit original from the case only 5 new holders had to be made because I cut the original HP spacer cut the pin and cut a hole and cut 3mm / 1/8 inch thread

Unfortunately, I can not continue because I do not get two CPUs to run, I bought the board and he had only one CPU installed!

Board is a 003 so also 6 cores suitable but I get only one whether 4 or 6 cores to run

the error looks like this from the HP-Z600 goes on and I see only the top left corner in the corner of the console flash or the Blue HP logo and so it stops! do I pee the CPU1 he goes without problems who would have a tip

Bios is 3.61 on it

Images:










The last picture shows where the Z600 stops is a second CPU installed
[/color]